Designed to hold up to (4) 12 gauge USE-2 or (4) 10 gauge PV-1000V solar wires.
Description
- Designed to hold up to (4) 12 gauge USE-2 or (4) 10 gauge PV-1000V solar wires.
- Also for use with other types of cables from .20″ (5,1 mm) to .30″ (7,6 mm) in diameter.
- Designed to provide a better method for PV module wire management and may be used whenever multiple cable management is needed.
- Smooth clip edges prevent damage to cable insulation.
- SunRunner 4 Cable Clip is designed to accommodate thicker racking systems up to .250” (6,4 mm) thick.
- Constructed from heat treated 410 stainless steel for excellent strength and corrosion protection for outdoor exposure.
- Not for use in a marine salt water environment. Contact ESTCO for alternative materials.
Quick Specs
Material: .020” thick heat treated 410 stainless steel
Dimensions
Dimensions tables are long and do not adequately fit on mobile devices.
View this page on a tablet or computer, or call Estco with questions about dimensions:
 |
|||||||||||||||||
| PANEL THICKNESS CLAMPING RANGE | WIRE DIA. RANGE | PART NO. | DESCRIPTION | FOOTPRINT | OVERALL HEIGHT | ||||||||||||
| Minimum | Maximum | Maximum (4) Wires | A x B | C | |||||||||||||
| in. | mm. | in. | mm. | in. | mm. | in. | mm. | ||||||||||
| .125 | 3,2 | .250 | 6,4 | .20” (5,1 mm) – .30” (7,6 mm) each cable | H-S6400 | SunRunner 4 100 Pack | 1.34 x .50 | 34,0 x 12,7 | .36 | 9,1 | |||||||
| .125 | 3,2 | .250 | 6,4 | .20” (5,1 mm) – .30” (7,6 mm) each cable | H-S6440 | SunRunner 4 Bulk | 1.34 x .50 | 34,0 x 12,7 | .36 | 9,1 | |||||||